DIY: Temporary MAF Plug


May 06

Ok guys – I run into this before with a friend who’s plug broke off wires near the nissan 240sx MAF plug and he needed something to work for him for few days.  Yeah it’s got scent of ghetto but it works..  It probably will work with other ones as well – it sits tight as well.  It’s your standard power supply plug for EIDE devices.. cut off the plug with some length of wires and then just solder or splice.
Just make sure to tape off the back of it so it’s bit more moisture proof.

broken_maf_plug_tmpsol


Leave a Reply